Alarm.com SEM210 Dual Path LTE SEM for PowerSeries Panels - ATT
BRAND
DSC
SES #
DSC ADCSEM210PSAT
MFG #
88030694
UPC
No UPC Set
Your Price
Usually ships between 3-7 business days
The Alarm.com Dual Path System Enhancement Module (SEM) is the most cost effective and comprehensive solution to migrate compatible DSC PowerSeries PC1616, PC1832 and PC1864 panels to Alarm.com's award winning interactive services. The Dual Path SEM supportsthe 4G LTE cellular network and optional Broadband Ethernet. This ensures the longest lifecycle with the most secure and reliable service.
- Supports the 4G LTE cellular network
- Fast, Reliable & Secure Wireless Signaling
- No Separate Power Supply Needed
- Remote Monitoring & Control via Web/Mobile
- Expansive Coverage Footprint
- Home Automation & Energy Management
- Easy-to-Read Diagnostics
- Over the Air (OTA ) Upgrades
- Easy Remote Programming with AirFX
- CID and SIA Central Station Signaling
Power Requirements
12 V nominal, 130 mA (continuous), 2000 mA (instantaneous peaks) maximum (from panel battery)
Cellular Network
Dual Band 4G LTE
Panel Interfaces
Three keypad bus connections / 12V power and ground to panel battery
Alarm.com Module Indicators
One module/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs
SEM Circuit Board Indicators
One LAN LED, one processor LED, one COMM fail LED
Z-Wave Frequency
908.4 MHz
Operating Temperature
32 to 120°F (0 to 49°C)
Storage Temperature
-30 to 140°F (-34 to 60°C)
Humidity
90% relative humidity non-condensing
Enclosure Dimensions (L x W x D)
7.5 x 4.25 x 1.5" (19.05 x 11.43 x 3.81 cm)
Case Material
High-impact, ABS plastic
Carrier AT&T
Part #: ADC-SEM210-PS-AT
Carrier Verizon
Part #: ADC-SEM210-PS-VZ
Compatibility
The SEM module is compatible with the following products: PowerSeries PC1616, PC1832, PC1864 version 4.2 and newer. PK5500/5501/5508 and RFK5500/5501/5564 V1.2+. PTK5507 V1.12+ and WTK5504 1.0+. IT-100 or PC5320 and SEM module cannot be used on the same system.SEM Supervision will take the last zone slot of the control panel