Addressable Passive Infrared Detector
BRAND
DSC
SES #
DSC AMB300
MFG #
AMB-300
UPC
No UPC Set
Your Price
Usually ships between 3-7 business days
The addressable passive infrared detector (AMB300) employs a large, multi-beam lens design, patented Multi-Level Signal Processing (MLSP) and temperature compensation to ensure human targets are identified. To ensure trouble-free operation for many years, special attention is given to false alarm immunity against RF, static and electrical transients. The detector uses a two-wire connection to the control panel that helps to reduce installation time and cost. The low current draw of the detector helps maximize the number of devices that can be attached to an addressable loop.
- Patented MLSP (Multi-Level Signal Processing)
- Interchangeable lenses: wall-to-wall lens (standard), curtain lens, pet-immune lens and corridor lens
- Built-in tamper switch
- Based on the Bravo 3 hardwire motion detector
Dimensions
3.5" (H) x 2.5" (W) x 1.87" (D) (89 mm x 64 mm x 48 mm)
Operating Voltage
9 to 14 V RMS*
Standby Current
2.5 mA
Current in Alarm
2.5 mA
Test Current
5.0 mA
Contact Rating
100 mA @ 24 VDC
Operating Temperature Range
32° to 122° F (0° to 50° C)
RF Immunity
0 V/m from 0.01 to 1,200 MHz
Relative Humidity
5% to 95%
Static Immunity
25 kV
Transient Immunity
2.4 kV @ 1.2 joules
White Light Immunity
20,000 Lux @ Device
Walk Detection Speed
0.5 to 10 ft/s (0.15 to 3 m/sec)
Alarm Duration
2 to 3 Seconds
Coverage Angle (BV-L1)
90° Minimum
Vertical Adjustment
+5 to -10°
Mounting Heights
BV-L1, L2, L3: 6 to 10.5 ft (1.8 to 3.2 m) / BV-L4: 4 to 5 ft (1.2 to 1.5 m)