SM1 Microphone +Smea1 IP Interface Module
BRAND
ETS (Electronic Technical Services)
SES #
ETS SM5EAKIT
MFG #
SM5-EA KIT
UPC
No UPC Set
Your Price
Usually ships between 3-7 business days
Single zone audio surveillance kit for use with powered over Ethernet I/P cameras. In line adaptor for tapping power off Ethernet powered I/P cameras to supply power to the SM1 microphone. Adaptor "breakout box" includes terminations for connecting the microphone to the "microphone" or "line input" of I/P cameras. Supports both modes A and B of IEEE802.3af. For use with ETSor Louroe microphones only.
Kit Includes:
- 1ea SM1 microphone
- SMEA-1 Interface
- Mounting screws (SM1s)
- Warning label
- 1ea 3' 3.5mm or RCA patch cable
- (please specify)
- Installation instructions
- SM1 Microphone Specifications
- Omni-directional Electret element.
- 25' range in all directions.
- Frequency response: 200-16Khz.
- Low noise MOSFET pre-amplifier.
- Line level, unbalanced output.
- Adjustable gain.
- Treble boost circuit. Selectable on/off.
- Limiter circuit. Selectable on/off.
- 3 position Euro-style connector makes cable termination fast and clean.
- Flush mountable. Can be mounted on a single gang electrical box.
- Power: 12 VDC @ 10mA
- See SM1 data sheet for more information.
- SMEA-1 Interface Specifications
- RCA or 3.5mm audio output jack.
- Transformer isolated audio output.
- Adjustable audio output level.
- RJ45 CAT5 in/out jacks.
- Modes A and B of IEE802.3af supported.
- A/B mode switch selectable.
- Straight through CAT5 connections (no crossover)
- Voltage input: 48-60Vdc
- 15vdc internal Voltage regulator supplies power to microphone. Current consumption: 15ma with microphone connected.
- Euro-style connector makes cable termination of microphone fast and clean.
- Led power indicator
- Auto polarity protected & fused.
- Dimensions: L 3.3 x W 2.0 x H 1.6