The FWC-CNV-PULL series are the Napco series of conventional manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single-action and dual-action manual pull stations are available. Resetting of the pull station requires either a Cat 30 key or a 1/8" hex key (depending upon the model used). An alarm condition is actuated by pulling down on the handle of the FWC-CNV-PULL and FWC-CNVPULLK single action models. On the dual-action models FWC-CNV-PULL2 and FWC-CNV-PULL2K, the Lift and Pull cover must be lifted before pulling down on the pull station handle. Once the pull station is activated, the handle cannot be put back into a normal standby condition without using the key operated reset feature.