4 Circuit Remote NAC Extender in Red Cabinet-6.5A
BRAND
Napco Security Technologies
MFG #
GEMC-NAC7S
SES #
NAP GEMCNAC7S
UPC
785026096779
Your Price
Usually ships between 3-7 business days
- 4-Supervised Outputs suitable as 24V, maximum 2A each, combined 6.5A maximum regulated Notification
- Appliance Circuits. These outputs can be configured as: 4 Class B or 1 Class A and 2 Class B or 2 Class A
- 3-Unsupervised Form-C Dry relay outputs activated by a programmed event generated by the Gemini C-Series control panel
- One supervised, isolated GEMC-Remote Bus interface
- One normally-closed (N/C) housing tamper input, identified by trouble on dedicated integral EZM zone
- Isolated integral ground-fault detection circuit
- One isolated input (terminals 1-2) to synchronize
- "Smart" outputs (Listed Wheelock or System Sensor horns/strobes) with other outputs from the C-Series motherboard or other GEMC-NACXX devices
- Power supply contains integral battery charger capable of charging up to 4 pairs of 7AH / 7.5AH / 8AH sealed lead acid or gel type 12V batteries.
- The system monitors for low battery, no battery, brownout and monitors battery charging circuit voltage, identified by battery trouble on dedicated integral EZM zone
- Remote bus interface and two Inputs are isolated, thus allowing for separate ground fault detection and annunciation
- Allows audible notification appliances (horns) to be silenced while visual appliances (strobes) continue to operate
- Input allows synchronized Wheelock/System Sensor operation between the motherboard or other C-Series NAC circuits, allowing for multiple NAC circuits to be used within the same area
- Each of the 4 NAC circuits are individually supervised for opens or shorts, and will annunciate and report separately
- Solid State over-current protection on the four NAC's