4-in-1 HD Video Balun with Pass-Through
BRAND
Seco-Larm
SES #
SCO EBP50102HQ
MFG #
EB-P501-02HQ
UPC
No UPC Set
Your Price
Usually ships between 3-7 business days
The fast, easy, and low-cost way to connect a CCTV camera to a monitor, multiplexer, or video recorder. The EB-P501-02HQ video balun allows the video signal of a single CCTV camera to be transmitted long distances over low-cost CAT2 to CAT6 unshielded twisted pair (UTP) cable. Great for both full-motion color and full-motion monochrome cameras, this balun increases the flexibility of where such cameras can be mounted. This CCTV balun also works over existing UTP cabling, making it perfect for use in nearly any building or across an entire campus. The EB-P501-02HQ’s patented design features built-in terminals for power OR data pass-through.
- 4-in-1 TVI / CVI / AHD / Analog video up to 4K/8MP
- Transmits up to 1,312ft (400m) depending on format, resolution, and cable used
- PAL / NTSC / SECAM compatible
- Passive operation – No power required
- Lifetime limited warranty
- Built-in ESD, EFT, and transient protection
- High immunity from interference
- Uses low-cost Cat5e/6 cable instead of costly coaxial cable
- Screw terminals for easy installation
- Small size allows mounting of multiple baluns behind a DVR
Range
TVI- 1080p: 492ft (150m), 4K/8MP: 656ft (200m) CVI- 1080p: 820ft (250m), 4K/8MP: 820ft (250m) AHD- 1080p: 656ft (200m), 4K/8MP: 820ft (250m) Analog- 1,312ft (400m)
Video Format
PAL, NTSC, SECAM
Maximum Input
1Vp-p
Insertion loss
10dB@0.3~100Mhz max. Return loss
Return loss
3dB@0.3~51Mhz max.
Frequency response
300kHz~100MHz
Common mode rejection
65dB min.
Wire type
UTP (Unshielded Twisted Pair) 24~16 AWG
Wire category
Cat2 min.
Attenuation
1.5dB max.
Impedance
Coax, make BNC- 75Ω@1MHz Terminal block- 100Ω@1MHz
ESD Protection
30kV (Air), 15kV (Contact), IEC 61000-4-2 compliant
EFT Protection
40A (5/50ns), IEC 61000-4-4 compliant
Lighting protection
2A (8/20μs), IEC 61000-4-5 compliant
DC loop resistance
52Ω/1000’ (18Ω/100m)
Differential capacitance
19pF/ft max. (62pF/m max.)
Power
No power required
Maximum Amperage
2A@12VDC, 2A@24VDC
Maximum pass-through voltage
24 VAC/VDC
Operating temperature
32°~131° F (0°~55° C)
Storage temperature
-4°~185° F (-20°~85° C)
Humidity range
0~95% (Non-condensing)
Case
ABS Plastic
Weight
0.6-oz. (18g)
Dimensions
1-15/16"x9/16"x7/8" (49x14x22 mm)