WB200 Waterbug PN#1043
BRAND
Winland
SES #
WIN WB200
MFG #
WB-200
UPC
082075011372
Your Price
Usually ships between 3-7 business days
The WaterBug® 200 ("WB200") is a water detection device ideal for computer rooms, document storage areas, warehouses, sump pumps and basements. WaterBug sensors activate the alarm when a conductive bridge is formed between 2 contacts. Protect your assets with the WB200.
- Monitors for the presence of water. Can be used to detect the absence of water.
- Device includes one standard unsupervised surface sensor (W-S-U).
- Device accepts up to six total sensors (W-S-U). Additional sensors (W-S-U) sold separately.
- 1 to 2 sensors can be located up to 200' (60.96m) or 3 to 6 sensors can be located up to 100' (30.48m) away from the device for a wide area of protection. Use 18-22 AWG twisted pair wire for extension of sensors from the device.
- Hard wire powered device. Ensure that the power running to the device does NOT have a connection to earth ground. This could result in a failure to detect water or ground fault.
- Power requirements of 8 to 28VDC at 35mA or 12 to 28 VAC at 100mA
- Unit operating range of 32 to 130 °F (0 to 54 °C) in non-condensing environment. Indoor use only.
- Output is 1 Form C (N.O./N.C.) with 30VDC at 1 Amp resistive/24VAC at 1 Amp resistive
- Dimensions of 4.1" x 2.36" x 1.18" (10.4cm x 6.0cm x 3.0cm)
Power Requirements
8 to 28 VDC @ 35mA8 to 28 VAC @ 100 mA
Operating Temp
32 to 130°F (0 to 54 °C)
Output
Form C (N.O./N.C.)1 Amp @ 30 VDC, resistive1 Amp @ 24 VAC, resistive
Audible Alarm
Install a BZ-1 for local buzzer.
Maximum Distance Between Console and Sensors
1-2 probes; max 200' (61 m)3-6 probes; max 100' (30.5 m) per sensor
Maximum Sensors per Console
6
Console Dimensions
4.1 x 2.36 x 1.18" (10 x 6 x 3 cm) with flanges
Companion Products
Check items to add to the cart or
